911 Carrera (997) F6-3.6L (2006)
Blower Motor: Removal and Replacement
Removing And Installing Heater/fresh-air Blower Motor
Removing heater/fresh-air blower motor
Set blower to position 0 on climate control and remove ignition key.
1. Unscrew the two fastening screws -1- of support strut and remove support strut.
2. Squeeze the plug -a- on the blower motor and pull off.
3. Unscrew the two fastening screws -2- holding the blower motor cover.
4. Remove the cover -3- for the blower motor and pull out the blower motor downwards.
Installing heater/fresh-air blower motor
1. Insert the heater/fresh-air blower motor from below into the heater/ A/C unit and position the cover -3-.