911 Carrera (997) F6-3.6L (2006)
-
Do not open the plugs for the lines and connections until shortly before installation.
-
When loosening or tightening the refrigerant lines with line connections, always counter with the special tool assembly tool 9822 if possible.
-
When loosening or tightening the refrigerant lines with connections to air-conditioning components (e.g. condenser), always counter with a size 21
open-ended wrench if possible.
1. Carefully insert the line into the engine-compartment disconnection point and secure with the fastening screw -3-. - Tightening torque: 14 Nm
(10.5 ftlb.)
2. Push the line on and secure it with the fastening screw -1-. - Tightening torque: 21 Nm (16 ftlb.)
Subsequent work
Subsequent work on compressor/evaporator line
Screw compressor to engine block.
Install drive belt.
Fill in refrigerant.