911 Carrera (997) F6-3.6L (2006)
Removing desiccator
1. Unscrew the fastening nuts -1- on the fluid tank.
2. Undo fastening screws -2-.
3. Unscrew the fastening clamp -3- and remove the fluid tank upwards.
4. In any case, replace the desiccator.
Installing dryer (fluid tank)
Installing desiccator (fluid tank)
In any case, replace O-rings for the refrigerant lines and wet the new rings with refrigerant oil.
Only install a new desiccator.
Installing desiccator
1. Position the fluid tank, connect the refrigerant lines and secure with the fastening screws -2-. M6 4.5 ftlb.
2. Connect the air-conditioning line -1- and tighten with fastening nut.
3. Tighten the hose clamp -3-.
4. Determine the quantity of refrigerant oil.
Subsequent work
Subsequent work for the dryer
1. Fill in refrigerant correctly.
2. Install cover on left for plenum chamber.