911 Carrera (997) F6-3.6L (2006)
Scissors
Work Procedure:
1
Remove instrument cluster, Workshop Manual "902519 Removing and installing instrument cluster".
2
Applying tricot tape:
2.1
Sticking a strip of tricot tape on each of the two centering pins for the instrument cluster (rear):
2.2
Cut off two 50-mm long strips of tricot tape, Part No. 999.551.170.40.
2.3
Pull off protective film on tricot tape (self-adhesive).
2.4
Center the tricot tape (--> Figure 1 -Inset 1, Item A-) at the lower edge of one centering pin (--> Figure 1 -Inset 1, Item B-) and then wrap it around
the centering pin.
2.5
Press the tricot tape firmly onto the centering pin and turn it up at the corners (--> Figure 7-Inset 2-)
2.5
Follow the instructions given in Steps 2.3 to 2.5 for the second centering pin.
3
Attaching felt:
3.1
Attach felt to the bottom of the instrument cluster at the left and right:
3.2
Cut the felt Part No. 955.551.140.40 in the middle lengthwise.
3.3
Pull off protective film on the felt (self-adhesive).