911 Carrera (997) F6-3.6L (2006)
Fuel Gauge Sender: Removal and Replacement
Removing And Installing Fuel Level Sensor
Tools
Tools
Preliminary work
Preliminary work - Carrera 2
1. Place protective covers on the vehicle.
2. Disconnect and remove battery.
3. Remove carrier plate for battery. Unscrew four M8 hexagon collar nuts -1- and remove lid. Check seal for damage and replace it if necessary.
Preliminary work - Carrera 4
1. Place protective covers on the vehicle.
2. Disconnect the battery.
3. Remove luggage compartment cover.
4. Remove cover for tank flange. Unscrew four M6 cap nuts -2-, remove the four washers and lift off the lid. Check seal for signs of damage.
Removing fuel level sensor