911 Carrera (997) F6-3.6L (2006)
Glove Box Lamp: Procedures
964419 Removing And Installing Glove Compartment Light
Removing glove compartment light
ATTENTION:
Danger of damage to property if bulbs are used or handled incorrectly.
-
Risk of damage to bulbs and bulb housing.
-
Switch off ignition and remove ignition key.
-
To prevent short circuits, the load in question must be switched off while changing bulbs.
-
Only bulbs specified in the bulb table may be used.
-
Bulbs with a higher wattage may damage the bulb housing.
-
New bulbs must be clean and free of grease. Therefore, never touch the bulbs with your bare hands. Use a cloth or soft paper when changing
bulbs.
-
In certain states, it is compulsory to carry spare light bulbs.
Glove compartment light overview
Removing glove compartment light
1. Press glove compartment light carefully out of the glove compartment at the cutout -arrow- using a screwdriver.
2. Release plug on glove compartment light -arrows a- and pull it off.
3. Remove glove compartment light.
Installing glove compartment light
NOTE: Only use the relevant bulb specified in the bulb table.