911 Carrera (997) F6-3.6L (2006)
Hazard Warning Switch: Procedures
944719 Removing And Installing Hazard Warning Light Switch
Removing hazard warning light switch
Overview of hazard warning light switch
NOTE: The hazard warning light switch is located in the middle air vent.
Releasing the air vent
1. With a screwdriver through the top air slot, release the left and right retaining clip -A- and pull the air vent out of the dashboard.
Electrical connectors
2. Pull apart the electrical plug connections and remove the air vent.
3. Unclip and remove hazard warning light switch from the air vent.
Installing hazard warning light switch
1. Position hazard warning light switch and press it into the air vent.