911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-1210002.png)
INFORMATION: The headlight must be calibrated following re-installation or installation of a new servo motor for range adjustment.
1. Release the servo motor by turning it clockwise (right headlight) or anti-clockwise (left headlight) (bayonet lock).
2. Slide the servo motor to the right (right headlight) or left (left headlight) and remove it.
3. Release and pull off electric connector.
Installing servo motor for cornering light beam adjustment
Installing servo motor for range adjustment
INFORMATION: The headlight must be calibrated following re-installation or installation of a new servo motor for range adjustment.
1. Connect electric connector for the servo motor until the connector engages securely.
