911 Carrera (997) F6-3.6L (2006)
GRA switch
2. Attach the GRA switch -B- and fold it upwards.
3. Turn the steering column switch and position the electronic unit.
Screw in 6 fastening screws
4. Turn the steering column switch round again and screw in the six fastening screws.
Position airbag contact unit
5. Position airbag contact unit and press onto the steering column switch until the three tabs engage -arrows-.
Removing and Installing Steering-Column Switch
945019 Removing And Installing Steering-column Switch
Technical values
Technical values - steering column switch
Tightening torque 4.5 ftlb.
Removing steering-column switch
Removing steering column switch Install location