911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-200002.png)
^
To be able to fill the correct quantity of oil after draining the old oil, a time of 20 minutes should be allowed for the oil to drip out.
^
Dispose of waste oil in accordance with legal requirements in your country.
3. Unscrew oil drain plug on the oil sump (SW 8) and allow the oil to drain into a collecting basin.
4. Clean the oil drain plug and screw it back in with a new aluminum sealing ring. Tightening torque 37 ft. lbs.
Changing oil filter
1. Loosen oil filter using special tool Oil filter spanner 92040.
2. Remove oil filter housing vertically downwards. Drain remaining oil into an oil collection container. Dispose of waste oil in accordance with legal
requirements.
3. Remove the filter element. Remove the paper filter downwards and dispose of it in accordance with legal requirements.
Note:
^
Never remove and install O-ring for oil filter with a sharp object!
^
Do not scratch the sealing surface of the oil filter housing.
4. Lever off the old O-ring on the housing groove with a screwdriver.
