911 Carrera (997) F6-3.6L (2006)
Tires: Removal and Replacement
Tyre mounting (removing and installing tyres) - for vehicle with and without tyre pressure monitoring system
Notes on removing/mounting tyres
Note:
^
Before fitting, check whether a Tire Pressure Monitoring system (TPM) is installed! The tyre valve serves as the distinguishing characteristic.
Without Tire Pressure Monitoring: rubber valve, with Tire Pressure Monitoring: aluminum valve. If tyre pressure monitoring is used, observe the
special instructions for the Tire Pressure Monitoring system.
^
The mounting machine described here is particularly suitable for large tyre combinations, such as those used by Porsche.
^
All parts in contact with the wheel and the tyres are made of plastic.
^
No large point load for wheel and tyres.
Tools
Notes on removing/mounting tyres
Note:
^
When fitting tyres, the direction of rotation and the inner and outer sides should be noted.
^
Use only TIP TOP Universal, order No. 593 0601 (3.5 kg bucket) or Contifix as the mounting paste.
^
Ensure that no damage (scoring, soiling) is caused to the assembly head of the fitting machine during fitting. Such damage may result in paint
damage and pressure marks on the rim flange.
-
Avoid slipping on to the rim flange. Use rim flange protection (assembly aid) -B-.