911 Carrera (997) F6-3.6L (2006)
4. Unscrew both plastic screws -1- for the cover in the passenger's footwell and remove the cover downwards.
5. Pull the power distributor away from the firewall and lower it down into the passenger's footwell.
INFORMATION: If a new power distributor needs to be installed or a fuse element replaced, then a new cover for the fuse elements (blue) and a
new seal label (red) must be fitted. The spare parts are summarized in the PET as a package.
6. Disengage the lock and fold the cover open. Pull off the original seal label -arrow-.
7. Unclip the cover for the fuse elements with a screwdriver.
8. Mark the connection leads to the relevant fuse element.
9. Unscrew the fastening nuts -1-, remove the washer -2- and take out the fuse element -3-.
10. Unscrew fastening nut for the B+ line and remove the power distributor.
Installing power distributor
Installing the current distributor