911 Carrera (997) F6-3.6L (2006)
1. Release connector on triggering unit for airbag-10-and fold open the locking lever.
2. Remove connector from the relevant component.
2.1. Connectors for stage 1 and stage 2 of passenger's airbag unit-1 and 2-
Release and remove connectors for stage 1 and stage 2 of passenger's airbag unit.
2.2. Connector for seat-belt tensioner, left -7- and right -8-
Release and remove connector on seat-belt tensioner.
Remove rubber sleeves -9-.
2.3. Cut off the connector of the damaged wire harness, isolate it and secure it to the main wire harness with tie-wraps.
3. Using a small screwdriver, lever the seal out of the connector housing.
4. Cut and remove tie-wrap for fixing the wire harness to the connector housing.