911 Carrera (997) F6-3.6L (2006)
19. Insert locking mechanism into the connector housing and press in -arrow B- until it is felt to engage.
20. Press cap onto the connector housing until it is felt to engage.
21. Secure wire harness with a new tie-wrap -arrow- to the connector housing.
22. Route the new wire harness along the main wire harness, guide it through existing cable ducts and tie it to the main wire harness using tie-wraps.
NOTE: Allocation of lines - see wiring diagram.
23. Plug new line into the contact strip until the contact is felt to engage.