porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 3813 > < Procedures|Page 3811
Page 42
background image

12. Release and disconnect plug connection between main wire harness and wire harness for door, left and right -59 and 60-.
13. Release and pull off connector for gateway control unit -65-.
14. Release and pull off connectors for KESSY/PAS control unit -66 and 67-.
15. Release and pull off connector for stop light switch-68-.
16. Release and pull off connector for pedal sensor -69-.
17. Loosen ground point under the unit carrier -76-.

17.1. Screw off fastening nut and remove ground straps.

18. Release and pull off connector for tilt sensor control unit -77-.
19. Disconnect plug connections between main wire harness and wire harness for heater/air-conditioning unit -79 and 80-.

19.1. Release lower plug connection on heater/air-conditioning unit -Arrows a- and disconnect.

19.2. Release upper plug connection on heater/air-conditioning unit -Arrows a- and disconnect.

Procedures|Page 3813 > < Procedures|Page 3811