911 Carrera (997) F6-3.6L (2006)
1. Install B+ line -3-.
1.1. Lay B+ line to transmission and push into the vehicle interior -Arrow A-.
1.2. Press B+ line into the grommet -Arrow B-.
1.3. Fit grommet -Arrow C-.
INFORMATION: For vehicles with manual transmission.
2. Clip B+ line -3- onto transmission bracket.
2.1. Insert B+ line into holder -Arrow A- and close holder -Arrow B-.
INFORMATION: For vehicles with automatic transmission.
3. Screw down guide tube of B+ line -3- on the body.
3.1. Position guide tube of B+ line on the body and screw down with fastening screw and fastening nut. - Tightening torque: 10 Nm (7.5 ftlb.).
INFORMATION: For vehicles with automatic transmission.