911 Carrera (997) F6-3.6L (2006)
8. Clip in B+ line -3- at heater/air-conditioning unit.
8.1. Secure the B+ line to the main wire harness with the two new tie-wraps.
8.2. Clip in B+ line at heater/air-conditioning unit with the tie-wraps.
Installing B+ line from starter to transmission connection point
1. Lay B+ line -5-.
INFORMATION: For vehicles with manual transmission.
2. Install cable duct of B+ line -5- at manual transmission.
INFORMATION: For vehicles with automatic transmission.
3. Install cable duct of B+ line -5- at automatic transmission.
4. Screw down B+ line -5- at box for B+ line -4-.
4.1. Insert B+ line into the box and tighten with the fastening nut -Arrow A-. - Tightening torque: 23 Nm (17 ftlb.)
4.2. Close box for B+ line on transmission -Arrow B-.