911 Carrera (997) F6-3.6L (2006)
Body Mounting Point For RoW Canister
1. Wet rubber sleeves with water. Press canister into the body bores -1-.
Carbon Canister For RoW
2. Connect plug-in couplings to the underside of the canister and clip in the lines. Screw in collar nut M6 on the holder and tighten. Tightening torque
7.5 ftlb..
Installing carbon canister - USA Version
View Of Plug-in Couplings
Plug-in couplings in the vehicle
1. Insert canister and connect the plug-in couplings which must engage audibly.
Carbon Canister For USA
2. Slide plastic holder for the canister -3- into the guide and fix to the plenum panel. Screw in two Torx screws M6 -2- and tighten. Tightening torque
7.5 ftlb..
3. Connect cable plug and clip into the cable guide on the canister -1-.
Subsequent work for carbon canister
1. USA version: Disconnect cable plug from CD changer.