911 Carrera (997) F6-3.6L (2006)
Ride Height Sensor: Service and Repair
Removing and installing sensor for body
Information on acceleration sensors
The two acceleration sensors are used to measure vertical movements of the body (one sensor per axle).
The acceleration sensors are fitted close to the spring struts at the front right and rear left. The sensors at the front right and rear left are identical.
Front right sensor
Rear left sensor
Removing and installing front and rear sensor
Removing sensor
Remove sensor on front axle
-
Remove covers over the right spring-strut supporting mount.
-
Release connector -1- and pull it off.
Loosen two M6 nuts -2-. Remove sensor -3- from the holder.