911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-715017.png)
16. Remove adhesive tape -3- (-Arrow A-) and carefully pull the lines -2- out of the eye on the wire puller -1- (-Arrow B-). Make sure that the
insulation on the new lines is not damaged.
17. Route new wire harness along the door wire harness and secure at the standard attachment points on the door sub-frame.
18. Push on connector of new wire harness for head airbag at the left -5- and right -6- until it is felt to engage.
NOTE: Allocation of lines - see wiring diagram.
19. Push new lines into the contact strip until the contacts are felt to engage.
