porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 3557 > < Procedures|Page 3555
Page 65
background image

6. Removing rear wall trim panel
7. Remove trim panel for seat well.
8. Remove relay carrier.

INFORMATION:  Only in the cabriolet.

9. Remove frame for roll-over protection system.

INFORMATION:  Only in the cabriolet.

10. Remove rear window lifter.

INFORMATION:  Only in the cabriolet.

11. Remove roll-over bar.
12. Remove auxiliary brake light.
13. Remove rear light at left and right.
14. Remove rear spoiler.
15. Remove air cleaner housing.
16. Remove reservoir.
17. Remove rear underbody cover.

INFORMATION:  Only for vehicles with tyre pressure monitoring

18. Remove rear wheel housing liner.

Removing rear wire harness

Exposing rear wire harness

1. Remove left footwell trim panel.

1.1. Remove fuse carrier cover -1- (-arrow A-).
1.2. Unscrew the three fastening screws -2- and take off the footwell trim panel -3- ( -arrow B- ).

2. Remove right footwell trim panel.

2.1. Partly loosen floor covering -1- at the bottom in the area of the A-pillar -arrow A-.
2.2. Unscrew both plastic nuts -2- and take off the footwell trim panel -3- (-arrow B-).

Procedures|Page 3557 > < Procedures|Page 3555