911 Carrera (997) F6-3.6L (2006)
3. Loosen seat belt mount at left and right.
3.1. Press off cap -1- with a screwdriver and unscrew the fastening screw -2-. Remove seat belt with fitting -3- and spacer sleeve -4-.
4. Disengage floor covering at the support and lay it in the vehicle interior.
5. Remove left and right support.
5.1. Unlock locating peg -1- of the support using the commercially available removal tool Disassembly tool, universal NR.21.
5.2. Unscrew fastening screws -2- and nuts -3- and carefully pull the support up and out of the retaining points.
6. Remove mounting saddle for rear-seat backrest.
6.1. Unscrew the two fastening screws -1- and remove mounting saddle for rear-seat backrest -2-.
7. Remove insulating elements in the area of the rear wire harness.
Removing rear wire harness