porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 3573 > < Procedures|Page 3571
Page 81
background image

Preliminary work for B+ line from starter to transmission connection point

1. Disconnect battery.
2. Remove throttle housing.
3. Remove generator.
4. Remove rear underbody cover.

Preliminary work for engine ground strap

1. Lift the vehicle.

Removing wire harness for battery wiring

Removing ground strap and B+ line of battery

1. Remove ground strap for battery -1-.

1.1. Unscrew fastening nut of battery ground strap to body and remove ground strap for battery.

2. Remove B+ line for battery -2-.

2.1. Cut through the positive cable of main wire harness -3- at the place indicated -arrows-.
2.2. Remove binding band from main wire harness until the sheathing of the positive cable -3- can be removed -Arrow A-.
2.3. Unscrew B+ line from battery.
2.4. Release and pull off B+ line from power distributor
2.5. Remove B+ line for battery.

Remove B+ line from power distributor to transmission connection point

Procedures|Page 3573 > < Procedures|Page 3571