911 Carrera (997) F6-3.6L (2006)
5. Clip in B+ line -5- at cable duct for engine wire harness.
5.1. Clip in B+ line at cable duct -arrows-.
6. Position starter lead for terminal 30 and secure with fastening nut. - Tightening torque: 18 Nm (13.0 ftlb.)
Fitting ground strap to engine
1. Fit engine ground strap -6-.
1.1.Position ground strap and screw down with the fastening screw and fastening nut. - Tightening torque: 23 Nm (17 ftlb.).
Subsequent work
Subsequent work for ground strap and B+ line of battery
1. Carry out work instruction after disconnecting the battery.
Subsequent work for B+ line from power distributor to transmission connection point
1. Install cover for centre underbody.
2. Install rear underbody cover.
3. Install parking-brake lever.
INFORMATION: For vehicles with automatic transmission.
4. Install selector support.
INFORMATION: For vehicles with manual transmission.
5. Install gearshift bracket.
6. Fasten triggering unit.