911 Carrera (997) F6-3.6L (2006)
and can only be replaced together with the padding. Depending on the I number, the padding spare part is only supplied with the heating element and
seat-heating wire harness attached.
Replace padding for front seat.
Removing and Installing Wire Harness For Tiptronic Transmission
Removing And Installing Wire Harness For Tiptronic Transmission
Preliminary work
1. Remove rear underbody cover.
Removing wire harness for Tiptronic transmission
1. Disconnect plug connection between wire harness for Tiptronic transmission and rear wire harness -1-.
1.1. Unclip plug connection between wire harness for Tiptronic transmission and rear wire harness -Arrow B-
1.2. Disconnect plug connection between wire harness for Tiptronic transmission and rear wire harness -Arrow a- -Arrows C-.
2. Pull off connector on change-over valve -2-.
2.1. Release connector on change-over valve -Arrow a- and pull off.
3. Pull off connector on Tiptronic transmission -3-.
3.1. Release connector on Tiptronic transmission by turning anti-clockwise -Arrow a- and remove -Arrow B-.