911 Carrera (997) F6-3.6L (2006)
1. Release connector to switch for power windows -2- and remove.
2. Release connector on midrange loudspeaker -3- and pull off.
3. Release connector on switch for memory seat adjustment -4- and remove.
4. Pull off plug on door warning light -7-.
5. Unclip connector of wire harness plug connection for door trim panel to door wire harness to the door trim panel -arrow A-.
6. Remove wire harness in-direction of arrow-from the clips of door trim panel.
Installing wiring harness for door
NOTE:
-
The wire harness for door spare parts scope means the scope for fully-equipped vehicles. Depending on the vehicle equipment, connectors not
required are tied to the wire harness for door using tie-wraps.
-
When doing this, ensure the lines are routed correctly so that no line becomes trapped or damaged.