911 Carrera (997) F6-3.6L (2006)
Rear vibration damper allocation
The item number and color dot coding is shown on the damper tube.
Assembling spring strut
Information
^
Observe the correct allocation (vehicle version and equipment) when installing new coil springs and/or shock absorbers.
^
Observe allocation of compensating plate according to the coil spring tolerance range.
^
Coil springs are only available in pairs.
1. Clamp the spring strut at a suitable place in the vice (use jaw liners).
2. When replacing the vibration damper, fit a new snap ring -10- - using snap-ring pliers VW 161 A - in the relevant groove -A or B- (see allocation
in next table).
Fit bottom concave washer -9- with the groove downwards facing the snap ring -10-. Ensure that the snap ring -10- and concave washer -9- are
seated correctly.
Snap ring position