911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-550001.png)
Torque Converter: Removal and Replacement
Removing and installing torque converter
Tools
Information
Notes
Note: When pulling out, the torque converter must be kept horizontal, otherwise ATF can emerge.
Note: Before installing the torque converter, check the hub for scoring. If damaged, the converter must be replaced.
Preliminary work
1. Remove transmission.
2. Put transmission in horizontal position.
Removing the torque converter
1. Pull out fixing pin 95951 (long) from transmission housing.
