911 Carrera (997) F6-3.6L (2006)
3. Screw in and tighten fastening screws -arrows- between ATF cooler and port plate.
4. Remove plugs, connect coolant hoses to flanges and fit hose clamps.
5. Remove hose clamp 3094.
Subsequent work
1. Install cross member -A- and diagonal braces -B-.
2. Fit stabiliser.
3. Bleed the cooling system.
4. Check and if necessary, top up the ATF.
5. Fit the underbody panel.
6. Lower the vehicle.