911 Carrera (997) F6-3.6L (2006)
Filling Capacities
Preliminary work
1. Move selector lever to position P.
2. Raise the vehicle at the prescribed jacking points.
3. Remove the underbody panels.
4. Place oil collection pan under the transmission.
Draining ATF
ATTENTION: Transmission cannot be filled, or only insufficiently with ATF.
^
Do not start engine
^
Do not tow vehicle
WARNING: Danger of scalding and chemical burns from hot ATF
^
Allow ATF to cool down
^
Wear personal protective gear (goggles, gloves)
1. Unscrew the drain plug -1- and drain the ATF.
2. Replace sealing ring for drain plug and tighten screw. Tightening torque: 22 (16 ft lb.) Nm.
Removing the electrohydraulic control unit
Dismantling