911 Carrera (997) F6-3.6L (2006)
Axle Flange: Service and Repair
Removing and Installing Right Halfshaft Flange
Removing and installing right halfshaft flange
Preliminary work
1. Raise the vehicle at the prescribed jacking points.
2. Remove the underbody panel.
Removing halfshaft flange
1. Detach coolant lines on the transmission.
Note: Protect drive shafts against mechanical damage (e.g. with a rubber hose which has been cut open).
2. Remove drive shaft on transmission side. To do this, unscrew the six hexagon socket head bolts joining the drive shaft and halfshaft flange.
3. Lever out halfshaft flange.
Installing halfshaft flange