911 Carrera (997) F6-3.6L (2006)
2. Screw in fastening screw for halfshaft flange. To do this, screw two drive shaft screws into the halfshaft flange for countering purposes and tighten
fastening screw.
3. Screw in and tighten fastening screws for upper control arms.
Note: Protect drive shafts against mechanical damage (e.g. with a rubber hose which has been cut open).
4. Fit drive shaft on transmission side. To do this, screw in the six Allen screws joining drive shaft and transmission flange and tighten screws.