911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-588002.png)
Note: To avoid damaging the sealing ring in the transmission, the halfshaft flange must be guided carefully into position by hand.
2. Carefully insert halfshaft flange into the transmission.
3. Screw in and tighten fastening screws for the mounting saddle using socket wrench 9330.
4. Screw in and tighten fastening screw for the coolant hose holder on the mounting saddle.
Subsequent work
1. Install left drive shaft.
2. Mount left rear wheel.
3. Lower the vehicle.
