911 Carrera (997) F6-3.6L (2006)
Pressing out wheel hub
Press the wheel hub out using press-out mandrel P 297a. Separating device ([diameter] = 12 - 115 mm) NR.111 and a suitable support must be
used for countering.
2. Remove bearing cover.
Removing bearing cover
Unscrew screws -1- and remove bearing cover -2-.
3. Heat wheel bearing housing to approx. 100°C (max. 120°C).
Warning
Hot wheel bearing housing!
^
Danger of burns
-> Wear heat-resistant gloves!
4. Press out wheel bearing using a tube VW 415 A.
Pressing out wheel bearing