911 Carrera (997) F6-3.6L (2006)
Flywheel: Overhaul
Removing and installing double-mass flywheel
Preliminary work
Preliminary work for double-mass flywheel
1. Remove manual transmission.
2. Remove clutch.
Removing double-mass flywheel - 3.8 l
Component overview
Overview of double-mass flywheel, 3.8 l
^
1 - Double-mass flywheel, 3.8 l
^
2 - Fastening screw for double-mass flywheel, (8 M10 screws)
^
3 - Clutch plate
^
4 - Clutch pressure plate
^
5 - Fastening screw for clutch pressure plate, (6 M8 screws)
Information
The toothed segment 9538/1 must be bored to [diameter] 15 mm to guarantee a perfect fit and to avoid damaging the thread in the crankcase.