911 Carrera (997) F6-3.6L (2006)
1. Screw M10 x 30 hexagon-head bolt into side A of Pressure piece 9734.
2. Thinly coat sealing lip and outer circumference of sealing ring with Vaseline and place the sealing ring on side B of pressure piece 9734.
3. Hammer the sealing ring along with pressure piece 9734 completely into the transmission by hitting the hexagon-head bolt.
Subsequent work
1. Install the right halfshaft flange.
2. Check transmission oil level.
3. Fit the underbody panel.
4. Lower the vehicle.