911 Carrera (997) F6-3.6L (2006)
Front Door Window Motor: Service and Repair
Removing and Installing Power Window Motor
645419 Removing And Installing Power Window Motor
Tools
Preliminary work
Preliminary work for power window motor
Remove and install door trim panel.
Removing power window motor
Installation position shown on the 997
1. If a new power window motor is to be installed, read out the values first. Switch off ignition and remove ignition key.
Release connector -a- and remove
2. Unlock electric connector -a- and disconnect from power window motor.
Unscrew fastening screws -1-
3. Unscrew the three fastening screws -1-.
4. Pull the power window motor out of the teeth.
Installing power window motor
1. Position power window motor and push into the teeth.