911 Carrera (997) F6-3.6L (2006)
Wiper Arm: Adjustments
Adjusting Wiper Arm Attack Angle
Tools
Preliminary work
Preliminary work for adjusting wiper arm attack angle
INFORMATION:
-
The wiper arm attack angle will need to be checked and adjusted if the customer complains of: rubbing or hesitation of wiper, noises when wiping
or uneven wiping area.
-
It is important that the wiper blades are inspected for wear and the windscreen is free of contamination.
1. Check condition of windscreen and clean off any contamination.
2. Remove wiper blade.
3. Inspect condition of wiper blade and replace if necessary.
Adjusting wiper arm
Adjusting wiper arm attack angle
Special tools: Adjustment device 9737
INFORMATION: Wiper system must be in the parking position. Before starting work, allow the wiper system to run 2 - 3 times with water spray.
WARNING:
Unexpected switching on of wiper system while working on the wiper arms.
-
Danger of trapping from wiper arms.
-
Switch off ignition and remove ignition key.