911 Carrera 2 Cabriolet F6-3600cc 3.6L SOHC (1992)
-
Remove the cover towards the bottom of the ashtray housing (Figure 3).
Installation of storage box onto the ashtray cover
-
The following work is for leather upholstered ashtray covers.
-
Push the storage box to the stop on the cover (Figure 4). It might require a little force.
-
Mark the cover as shown (Figure 4, insert), on the edges of the cover. Remove the storage box from the cover and cut the marked leather edges off.
-
Push the cover fully into the storage box.
Note:
Pushing the cover into the storage box should be relatively easy. If not, the leather edges need to be reworked slightly.
-
Reinstall the ashtray cover into the ashtray housing and snap into place. Reinstall the insert. the gap between the ashtray cover and the kneebar
should be 3.0 mm on both sides.
-
After the installation of the ashtray with the storage box, the ashtray should open and close easily. If not, the sides of the ashtray cover should be
reworked again.
Parts:
Part Number
Description
Qty
000 044 000 09
Storage Box
1
Labor:
Labor Operation
Time Units
Description
68 16 23 00
50
Install ashtray cover with leather.
68 16 23 03
30
Install ashtray cover with vinyl.