911 Carrera 2 Cabriolet F6-3600cc 3.6L SOHC (1992)
Power Steering Fluid: Testing and Inspection
Checking Hydraulic Operation of Steering System
- (pressure measurement) -
Note: All parts (Nos. 1 to 6). The pressure gauge is connected to the power pump (between power pump and pressure line).
Flange No.6 connects to the power pump. Adapter No.1 connects to the pressure line.
If the old pressure gauge No. 3b is used (see below), make sure the high-pressure hoses No. 2b and No.5 are connected to the pressure gauge In the
correct positions.
The high-pressure hoses, however, may be connected in any position on pressure gauge No. 3a.
A = M18 x 1.5 with head seal
B = M16 x 1.5 with head seal
C = M18 x 1.5 flat sealing face with sealing ring
D = M16 x 1.5 flat sealing face with sealing ring
E = M14 x 1.5 flat sealing face with sealing ring
* Threads M 18 x 1.5 or M 16 x 1.5, depending on pressure gauge type.