911 Carrera 2 Coupe F6-3600cc 3.6L SOHC (1990)
Figure 9
ATTENTION: These pages replace pages 5 and 6 of Technical Bulletin Group 5, Number 9003, dated October 9, 1990.
Parts Information:
Replacing support brackets left and right.
1 - 964 505 475 00 Support bracket (2 per vehicle) 2 - 964 503 469 00 Fastening plate (2 per vehicle) 3 - 900
075 268 02 Screw with washer (2 per vehicle) 4 - 999 190 128 30 Rivet A 4.8 x 7.4 (4 per vehicle) 5 - 999 591
699 02 Nut B4.8 (2 per vehicle)
Figure 10
Installing reinforcement plates (Figure 10) (only if necessary).
1 - 964 503 755 00 Reinforcement plate left 2 - 964 503 756 00 Reinforcement plate right
Labor Information:
Damage Code: WL 12 66 000 2 (Note: Paper claims must be Repair Code: 2 submitted until the next
Repair Times:
Work Procedure 1 DCS download.)
Labor Operation:
53555600 120 TU Installing support brackets with fastening plates left and right.
Repair Times:
Work Procedure 2
Labor Operation:
53551900 240 TU Welding work with reinforcement plates on one side. Install support brackets left and right. Includes R + R
rear panel, heat protection, bumper and taillights. Does not include paint work.
53555602 320 TU
Welding work with reinforcement plates on both sides.
Install support brackets left and right. Includes R + R rear panel, heat protection, bumper and
taillights. Does not include paint work.
Note:
Paint work must be claimed using miscellaneous claim code of "P" and the $ dollar amount must be entered in the
miscellaneous cost field.