911 Carrera 2 Coupe F6-3600cc 3.6L SOHC (1990)
Clutch Pedal Assembly: Service and Repair
Disassembly/Assembly of Pedal Assembly
Disassembly
-
Drive dowels out of clutch pedal shaft. If necessary (if dowels are very tight), support lever shaft to prevent deformation.
-
Remove clutch pedal shaft.
-
Remove bearing tube for footbrake lever.
-
Remove servo spring bearing shaft.
Assembly
-
Check levers, bearing shafts, bearings, circlips, springs, all sleeves and pins, replace if necessary.
-
If necessary, use a suitable mandrel to press or drive bearing for clutch pedal shaft slightly deeper than flush (arrows).
-
Install servo spring with lever lugs in pedal bracket.