911 Carrera 4 Cabriolet F6-3.6L SOHC (1998)
4
Insert connecting wire
Route connecting wire across hole in bulkhead, put grommet into place and insert connecting wire into radio.
Tie connecting wire to wiring harness along side member.
5
Install and connect battery
Enter radio code, correct clock setting and carry out system adaptation.
6
Fit bracket for CD changer
Fit CD changer bracket to side member, using M 6 x 16 combination screws (4 pc.).
7
Fit CD changer
Plug connecting wire into interface (CD changer). Fit CD changer to CD changer bracket, using M 4 x 8
combination screws (5 pc.).
8
Check CD changer operation
9
Fit spare tire, modified front
compartment carpet and
trim for CD changer