911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'CDR23' in the Control units menu and confirm with the [>>] key.
-
Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the [>>] key.
-
Select"GAL (NLB)" in the 911 (996) CDR23 coding function selection and confirm with the [>>] key.
-
Select 'Value' corresponding to the desired volume and code with the [F8] key.
-
Country coding
You can code the country code using this menu item.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'CDR23' in the Control units menu and confirm with the [>>] key.
-
Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the [>>] key.
-
Select 'Country coding' in the CDR23 coding function selection and confirm with the [>>] key.
-
Select "RoW or USA" and code with the [F8] key.
-
PCM2 code
It is possible to code the PCM2 code under this menu item after replacing the CDR23.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'CDR23' in the Control units menu and confirm with the [>>] key.
-
Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the [>>] key.
-
Select 'PCM2 code' in the CDR23 coding function selection and confirm with the [>>] key.
-
Take the PCM2 code from 'IPAS', enter it using the arrow keys and code it with the [F8] key.
-
Production mode
You can code the production mode using this menu item.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'CDR23' in the Control units menu and confirm with the [>>] key.
-
Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the [>>] key.
-
Select 'Production mode' in the 911 (996) CDR23 coding function selection and confirm with the [>>] key.
-
Select 'Production mode ON/OFF' in the CDR23 coding function selection and confirm with the [F8] key.
-
Tuner parameters
You can code the tuner parameters using this menu item.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'CDR23' in the Control units menu and confirm with the [>>] key.
-
Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the [>>] key.
-
Select 'Tuner parameters' in the 911 (996) CDR23 coding function selection and confirm with the [>>] key.
-
Select the required 'tuner parameters' in the CDR23 Modify coding function selection and code with the [F8]
key.
-
Traffic broadcast
You can code the traffic broadcast
loudspeaker boost
loudspeaker boost using this menu item.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'CDR23' in the Control units menu and confirm with the [>>] key.
-
Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the [>>] key.
-
Select 'Traffic broadcast loudspeaker boost' in the 911 (996) CDR23 coding function selection and confirm
with the [>>] key.
-
Use the arrow keys to select the required 'traffic broadcast loudspeaker boost' in the CDR23 Modify coding
function selection and code with the [F8] key.