911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
6.
Install backrest shell on backrest frame.
Note: In the case of a cable with slotted plate, the cable play is adjusted by means of the adjusting screw on the slotted plate. With the backrest in
the locked position there must be approx. 1 mm play between adjusting screw and release pin (Figure 4, arrow).
7.
Install backrest covering and reinstall seat.
Warranty Info:
Labor Operation
Time Units
Description
72 31 41 00
230 TU
Includes: Removing and installing seat, backrest covering
and backrest shell, installing repair kit, and adjusting cable for
one seat.
72 31 42 OO
410 TU
Includes: Removing and installing seat, backrest covering and
backrest shell, installing repair kit, and adjusting cable for two
seats.
Literature:
Boxster Tecnnical Manual, Group 7, Sections:
72 0119 - Removing and installing front seat.
74 19 19 - Removing and installing covering for backrest.
72 19 37 - Disassembling and assembling backrest frame.