911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
4.
Place the bushing on the bore by hand from the left side of the pedal (figure 2) and press approx. 3/4 of the length of the bushing into the eyelet
with adjustable pliers. Finish by pressing the bushing in using your hand or a small hammer as far as it will go.
5.
Reinstall the brake pedal
Working Time:
Manual transmission vehicles:
Labor Operation
Time
Description
46 05 49 00
270 TU
Reworking the brake pedal and installing the bushing.
Includes: Removing and installing the brake pedal
Tiptronic vehicles:
Labor Operation
Time
Description
46 05 49 03
170 TU
Reworking the brake pedal and installing the bushing.
Includes: Removing and installing the brake pedal
Literature:
911 Carrera (996) Technical Manual, Group 4:
46 05 19 06 - Removing and installing the brake pedal
Technical Bulletin number 3/98 - Brake and clutch noise
Disclaimer