911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
Seat Belt: Service and Repair
Sales Check
Fitting Six-Point Seat Belt - GT3
The six-point seat belt is not fitted for the Club Sport equipment when the vehicle is delivered.
NOTE:
-
Six-point seat belts are intended only for competitive use.
-
Three-point belts must be fastened when driving on public roads.
-
The legally permissible treatment must be obtained from the relevant national importer.
1. Loop technique for fastening the seat belt to the bucket seat cross member
-
Loop the belt strap in the direction of the arrow -inset- around the front transverse strut on the bucket seat into the adjustable slider. The
projection -dimension = X- of the belt strap must be at least 100 mm.
2. Pulling six-point seat belt through the openings in the bucket seat
-
Pull six-point seat belt through the upper openings in the backrest from behind -arrow A- and through the openings in the seat frame from the
side -arrow B-.
3. Fitting belt fitting
-
Position foam part -4- and belt fitting -5- at the left and right on the seat frame. With the shim -3- and the fastening screw -2-, screw the belt