911 Carrera 4 Cabriolet (996) F6-3.4L (1999)
2. First tighten screws for hydraulic control unit (arrows) hand tight. Then tighten to 8 Nm (6 ft. lbs.) from inside outwards.
3. Thinly coat gasket on the suction collar of the ATF filter with Vaseline and install filter.
4. Replace gasket for ATF pan.
5. Clean all four magnets in the beads of the ATF pan and ensure there is contact over the full area of the ATF pan.
6. Tighten screws of the ATF pan in diagonally opposite sequence in several stages.
7. Fill in ATF.
Tightening torques