911 Carrera 4 Cabriolet (996) F6-3.6L (2003)
Convertible Top Cable: Service and Repair
Replacing The Tension Cable
The following spare parts and tools are required for the repair Replacing the tension cable:
Removing the tension cable
1. Removing convertible-top covering.
1.1. Remove convertible-top covering. Refer to Replacing convertible-top covering with flexible rear window.
2. Disengaging the tension cable at the shaped sheetmetal part.
2.1. Cut the plastic sleeve -2- open with a pair of scissors.
2.2. Disengage the tension cable -3- from the tension spring -4- at the shaped sheetmetal part.
2.3. Pull the tension cable -3- out of the seal -5-.
Installing the tension cable
1. Fitting the tension cable at the shaped sheetmetal part.