911 Carrera 4 Cabriolet (996) F6-3.6L (2003)
Variable Valve Timing Solenoid: Service and Repair
Removing and Installing Hydraulic Valve For Camshaft Adjustment - Engine Installed
Removing And Installing Hydraulic Valve For Camshaft Adjustment - Engine Installed
CAUTION: Risk of soiling. Absolute cleanliness is essential when working with hydraulic valves.
Removing Hydraulic Valve For Camshaft Adjustment
NOTE: The rear muffler must be removed and the holder must be detached before the hydraulic valve on cylinder bank 4 - 6 can removed.
1. Remove the side shield on the respective side of the engine. Unscrew the two M6 hexagon-head bolts for this purpose.
Figure shows cylinder side 1-3
2. Remove cable plug of the hydraulic valve -1- by pressing the clip and pulling off the cable plug.